Select Page

4-Panel HUB-Set GRINDING PANEL for DN150 / WITH grinding aid / 12mm

Quick overview HUB set GRINDING PANEL for DN150 / with grinding aid / 12 mm

  • After inserting the sanding panel and attaching the sanding aid, it is immediately ready for use, assembly including connection to the shaft takes approx. 5 minutes.
  • Suitable for pipes DN150
  • Suitable for the 12mm units Midi Miller, Maxi Miller and Maxi Miller Plus.
    Scope of delivery:
4-Panel HUB-Set GRINDING PANEL for DN150 / WITH grinding aid / 12mm

4-Panel HUB for DN150 with quick mounting / 12mm

70,00€
  • The HUB serves as a holder for the grinding and polishing panels for the HUB set with quick-release fastener.
  • The HUB set is used to cleanly grind and polish pipes, as well as to grind or polish side inlets.
  • Suitable for 12 mm shaft for use with Maxi Miller units.
  • In the HUB 4 panels with quick-release fasteners are used.
  • Suitable for DN150 pipes.
  • Diameter HUB 40 mm
  • Suitable for this HUB: -Grinding panel for DN150 with quick fastening for 4-panel HUB -Polishing panel for DN150 with quick fastening for 4-Panel HUB (Shown below for parts/spare parts)
  • Material: stainless steel
  • Processing: turned / milled
  • Scope of delivery: HUB incl. screws for mounting on the shaft.
  • The "HUB-DISC without hole 40mm for 4-Panel HUB" to secure the panels must be ordered separately. (Shown below for components/spare parts)

In stock

4-Panel HUB-Set GRINDING PANEL for DN150 / WITH grinding aid / 12mm

4 x Grinding panel for DN150 with quick fastening for 4-panel HUB (150x200mm)

5,42€
  • The grinding panels with quick-release fasteners are inserted into the corresponding HUB with 12mm shaft.
  • Suitable for "4-Panel-HUB for DN150 / 12mm".
  • For DN150
  • Dimensions: 150x200mm
  • With quick-release fastener
  • Grain size: P 24
4-Panel HUB-Set GRINDING PANEL for DN150 / WITH grinding aid / 12mm

Grinding aid SMALL for DN100 and DN150

245,00€
  • The grinding aid is mounted on the head of the HUB´s with an Allen screw.
  • The spring holds the complete HUB in position at a 45° angle and thus prevents the pipe edges from grinding on or off.
  • Suitable for pipes with corresponding HUB´s for DN100 and DN150.
  • Material: stainless steel / PE

In stock

4-Panel HUB-Set GRINDING PANEL for DN150 / WITH grinding aid / 12mm

HUB DISC without hole Ø40mm for 4-panel HUB

13,25€
  • For securing the milling panels in the HUB.
  • Suitable for 4-panel HUB with quick-release fastener diameter 40 mm
  • Material: stainless steel
  • Processing: turned / milled
  • Scope of delivery: Disc incl. 4 Allen screws with snap rings

In stock

SKU: 21.64307 Category: Tags: , , ,

You may also like…

Kunden kauften auch ...